|
|
Exi-Controller CTR210i
 | DMT 02 ATEX E 148
| | For applications in hazardous areas
| | Direct connection of sensors and actuators
| | Three analogue inputs 4 - 20 mA, optional Pt 100
| | Two analogue outputs 4 - 20 mA
| | Six digital inputs and outputs
| | Cascade control, ratio control,dual loop control, difference control
| | 16 step setpoint programmer function
| | Special functions for jacket / product heating systems
| | For use as a manual/ automatic station and as a set point setter
| | Fieldhousing IP65 available
| | Modbus interface |
The CTR 210i is an intrinsically safe single loop controller that can be installed directly in hazardous areas.
Display: | Process variable
| | Setpoint
| | Control deviation
| | Output
| | Indication Manual / Automatic |
The CTR 210i is operated by 8 keys on the front panel. | Direct connection of sensors and actuators in the hazardous area
| | Three analogue inputs 4 - 20 mA or optional PT 100 (3 - wire)
| | The two analogue outputs can be used in a splitrange function.
| | Six digital inputs for switch functions
| | Six digital outputs for alarms.
| | Modbus interface for the communication with a supervisory system. |
Special software functions: | Cascade control, ratio control, difference control, dual loop control
| | As a dual loop controller, the controller provides two parallel output signals or alternatively the lowest respectively the highest of each.
| | Special functions for temperature- control of batch reactors, e.g. the limitation of the difference between jacket- and product temperature and the prevention of batch-temperature overshoots.
| | integrated automatic 16 - step set point programmer function
| | special functions for the use as a manual-/automatic station or as a setpoint setter |
|
|
Also available as field housing
|
